Mod-chip-wizard.com >> >> >> D2CKEY >> >> Wii >> >> D2CKEY >> >> NINTENDO WII >> D2C WiiKey installation melbourne

The Modbo v4.0 PS2 Mod Chip is the latest chip from the guys at Modbo. The ModBo 4 is considered one of the most universally compatible PS2 Mod Chips on the market today. With support for all version of PS2 Consoles from v1-v16

Fully compatible with ps2 v1-v16 PAL / USA / Jap
Upgraded from modbo3.0, comes with original 100% v1.88 firmware, but it isn't upgradeable
Comes with mini size board and the wiring point order is good for installation
Automatic selection for PS2/PS1/DVD supports
DVD region free incorporated
Software selectable "PS2 Quick Load" option. (to skip PS2 logo and Quick boot PS2 games)
Software selectable "PSX Quick Load" option (to skip PS1 logo and Quick boot PSX games)
Easy to install (only 18 wires for V1-V8 and 20 wires for V9, V10, V11, V12, V13)
CPLD chip (3.3V power supply) based IC for enhanced stability
Automatic "MACROVISION=OFF" on all PS2 from V3 to V16 without additional wires
Automatic "green fix" (no more need to change the cable to see your DVD movies on the PS2)
Imports games fix (all PSX import games are played at full screen and full color
Stealth-mode (the modchip can be switched off and becomes invisible to online gaming)
Sleep-mode (the modchip will switch off itself after boot)
Supports DVD-9 games
Plays all CD's and DVD's games (both, import or backup's)
Supports multi-disk games
Supports anti-mod PS1 games (only for V9 - V16 PS2)
Very reliable (all the Modchips are 100% tested before delivery)
Very stable (thanks to sleep mode the IC will never overheat)
CD lens safe (avoid CD lens damage by sending un-necessary signal to drive controller)
Supports DEV1 and DEV2 for memory card booting

Compatible with every PS2 version (V1 -V16), no need to check your PS2 version

Mod Chip users rave about its better compatibility with DVD 9 games, the Modbo 4.0 runs dual layer much better then older models. Modbo 4.0 comes on a differently layed out pcb to earlier model Modbo chips for a slightly neater install. It also have the ability to turn your PS2 into a totally DVD Region Free Player, as well as removes Macrovision protection from DVD Movies so that you can record your DVD movies to VHS tapes directly from your PS2 DVD Drive. Excellent chip for end users as well as installers. No more guessing which model PS2 you have, because this ps2 mod chip will just do it all.

The Modbo v4.0 is the latest chip from the guys at Modbo.com. The Modbo v4.0 is compatible with v5 to v16 and it is also compatible with the newly released SCPH-7700x & 7900x consoles. Its PCB layout is a perfect “L” shape which makes install a breeze. We believe this chip is a great solution for those looking for a compact and feature packed chip without the high price tag. We also want to explain to customers that there are two producers of the Modbo range of chips, first are the guys at Modbo.com who produced the Modbo 3.0 & Modbo 4.0. Second are the guys over at Modbo2.com who produced the Modbo v2.1 & Modbo 745.

A major difference we found between Modbo 4 and Modbo 745 is the Modbo 4.0 does work from v5 to v16 as advertised, but the Modbo 745 has trouble working in consoles under v9. Another bonus with the Modbo 4.0 is its now running the Matrix Infinity firmware v1.91 and is also possible to upgrade the firmware at a later date without any problems. If that wasn’t enough, they have now managed to get the firmware’s config menu and all its options to work and save. You can now go into the config menu and setup the Modbo 4 the way you want it, this is extremely handy for a lot of reasons. The Modbo 4.0 also uses a clock point, some of our customers have found that chips using a clock point “CX” are generally more stable then the same type of chip not using a clock point.

The Modbo 4.0 is a clone of the original Matrix Infinity range of PS2 mod chips. One of the major improvements Modbo 4 has over other Matrix clones is its better compatibility with DVD 9 and runs dual layer much better then older models. Modbo 4.0 comes on a differently laid out pcb to earlier model Modbo chips, allowing for a slightly neater install. There are a few clones of the Matrix Infinity floating around, Modbo , AppleEx , Matrix Infinity SE and some more. The good thing about these chips is you are getting most of the functions of the original Matrix Infinity at the fraction of the cost. The Modbo 4 also has auto media detection for direct booting and All Region DVD Support. The Modbo 4 also comes with a Diode fix for the PSTwo Slimline v12.

Please note that the Aus PAL consoles *need* the "H" point connected. This point is normaly only used on NTSC consoles, but our Aus PAL consoles require this point to function. As the PAL diagrams do not show "H" point, use the USA diagrams for v9 to v16 & the JAP diagrams on v5 & v7 for only the "H" point.

Wii and Gamecube games, on-the-fly region patching, audiostreaming fix and more.

350MHz Performance with advanced AES128 bit encryption, ultra-low-power core.

Compatible with DVD+/-R and RW media (no bitsetting required) -multigame discs.

Integrates a next-generation ICMS to ensure stability during loading and gameplay.

D2CKey Works Flawlessley on GC2-D1 and GC2-D1A - Confirmed! - 2008-01-16

Argon 9 Wire Wii