Argon D2C Specs / Standard and Alternate ARGON Install Diagrams:
SUPPLIED AND FITTED :
DMS D2A D2B Wii console - GENUINE WIIKEY - Wiikey Chip + Installation - AU 69.95
D2C Wii console - GENUINE D2PRO or D2CKEY Chip + Installation - AU 89.95
D2C Wii Console - ARGON SPI - D2SUN - D2E Chip + Installation - AU 99.95
Most Experienced Modchip Technicians in Australia »
| 0433 481 775 | fix @ modchip-wizard. com |
Brisbane Australia |
12 months Warranty on installation and chip » this is Factory warranty
If you want us to warrant your Wii console » AU 28 for 12 months Full Replacement Warranty
|
|
|
|
|
|
|
|
Wii ARGON Chip - Product Description
ARGON 2.0 FOR DMS, D2A, D2B, D2C, D2C2
WASABUS 2.1
To Play NTSC Games on Chip Wii Console:
Connect wii by component cables- if possible. (Red Green Blue)
Turn off De flicker in game options
Toggle between 50-60Hz in wii video options menu
This failing get a better chip or later bios flashed or better installation
Wii Console Drive Chipset Board Models :
GC2-DMS – Wii Chipset no pins cut and can have mod chip installation
GC2R-D2A – Wii Chipset no pins cut and can have mod chip installation
GC2-D2B – Wii Chipset found with/without pins cut but can have modchip installation
GC2-D2C – Wii Chipset so far no pins cut and only compatible with .: Wii D2C MODCHIP :.
GC2-D2C2 – Wii Chipset so far no pins cut and only compatible with .: Wii D2C2 MODCHIP :.
GC2-D2E – Wii Chipset only compatible with .: Wii D2E MOD CHIPS :. Wii chip installed
D2C2 Epoxy – Wii Chipset only compatible with .: Wii D2C2 MODCHIP :.
D2E Epoxy – Wii Chipset only compatible with .: Wii D2E MODCHIP :.
New 9 Wire Argon 2.0 Firmware available for Nintendo Wii : DMS - D2A - D2B - D2C - D2C2
WASABUS - 2.1 - FOR D2C2 CONFIRMED VERSION - ARGON and INFECTUS2 - RELEASED
Code injected in the controller is the same like wasabi, is tested in this version only on WII D2C versions.
Kindly to advise you that our 9 wires argon - WASABUS ARGON SPI - Released.
INFECTUS TEAM - ARGON SPI - 9 WIRES FIRMWARE RELEASE
FIRMWARE ONLY FOR ARGON WITH ACTEL A3P250 and A3P125"
the version A3P125 is also available !!!!
http://www.infectus.biz/forum/index.php?topic=1768.0
In this ZIP fill you will find these things:
1- INFECTUS PROGRAMMER, beta version to manage correctly
ARGON SPI update
2- wasabus_argon.bin, this is the firwmare that is necessary
to flash inside the SPI flash of ARGON
3- wasabus_a.dat, this is the new ACTEL firmware to support
9 wires installation
Procedure to upgrade ARGON SPI with new WASABUS FIRMWARE 9
WIRES:
1- Install the new programmer (use the DLL of the official
version
2- TOOLS > OPEN INFECTUS load the "wasabus_a.dat" and
program the ARGON like other firmwares
3- EXIT FROM "OPEN INFECTUS" MENU
4- DISCONNECT THE INJECTUS PROGRAMMER FROM USB AND RECONNECT
5- ON THE BOTTOM RIGHT CORNER THE PROGRAMMER WILL SHOW THE
SPI FLASH ID (is very important that there is the PART NO.
PM25LV020)
6- GO TO MENU "FLASH COMMAND" > SELECT ERASE and than WRITE
(select the file wasabus_argon.bin) and wait the flashing
procedure.
WASABUS debug LEDS:
The LED on the ARGON will show you if modchip is correctly
working or not, is very simple
LED OFF = Don't works
LED ON = Code injection procedure is complete
REGIONAL SETUP:
Current firmware is setup by default like PAL, and in the
next revision we will use two ARGON pads to configure the
regional version.
NEW COOL FEATURE WITH INJECTUS CONNECTED:
The new firmware allow the users to leave INJECTUS
PROGRAMMER connected to the modchip and use the SWITCHES and
LED to understand the modchip status.
Pls. remove the USB cable from PC when you use INJECTUS to
configure ARGON and check ARGON STATUS.
When argon is correctly working the INJECTUS will show GREEN
LED ON, if the LED IS RED, the modchip is OFF.
The switch allow to configure regional configuration or
switch off the modchip the combinations are:
Switch 1 = Off
Switch 2 = Off >>> PAL firmware
Switch 1 = On
Switch 2 = On >>> Modchip disabled
Switch 1 = On
Switch 2 = Off >>> JAP firmware
Switch 1 = Off
Switch 2 = On >>> USA firmware
INFECTUS 2
It is a 9 wires modchip and without any program in it -
whatever program you put in - it will work this programm.
It is Powerful » It is Flexible »
![]() |
PROCEDURE TO PROGRAM INFECTUS:
- Go to TOOLS>OPEN INFECTUS
- Load and program Wasabus.dat from the panel.
- Close the panel and program the flash with Wasabi.bin
The switch on infectus 2, must to be:
both off = PAL
both on = USA
1 off 2 on = JAP
INFECTUS2:
1- Supports all chipset versions: DMS, D2A, D2B and D2C (including D1A)
2- ONLY 9+1(clock) WIRES on D2C
3- ONLY 5+1(clock) WIRES on DMS, D2A, D2B
4- On-board flash (512KB) (wasabi only 128KB)
ARGON:
1- Supports all chipset versions: DMS, D2A, D2B and D2C (including D1A)
2- ONLY 9+1(clock) WIRES on D2C
3- ONLY 5+1(clock) WIRES on DMS, D2A, D2B
4- On-board flash (256KB) (wasabi only 128KB)*
COMPLETELY FLEXIBLE ARCHITECTURE -
ARGON 2 D2C Modchip for Wii- can now also be flashed with Playstation 2 ARGON2 PS2 Mod chip Firmware -
Install Argon 2.0 ( By Team Infectus ) on any Model Wii & any model PS2.
ARGON 2.0 FOR Wii DMS, D2A, D2B, D2C, D2C2
![]() |
1- Work on all D2C WII boards*
2- 13 wires connection
3- 100% UPDATABLE! Trought the on board JTAG connector*
4- ACTEL processor
5- Direct Boot from Wii games. ( extreme compatibility, more than Wiikey/D2Ckey/D2Pro / Wasabi)
6- Dirct boot for every GC game
7- Multiple disc support
8- Audio streaming for GC Games supported
9- Partial regional Patch (work on 80% of games)
DVD media compability
DVD+-R
DVD+-RW
Dual-layer DVD (movies and GCOS)
Game disc support:
Direct boot of Wii original and backup games from the same region
Direct boot of Gamecube original and backup games from the same region
Direct boot of different NTSC region Wii and GC games on USA and JAP consoles
Partial region free support on Wii and GC original and backup games with different videomode (ie PAL<->USA, JAPAN)
Improved readsettings for recordable media
Supports running GC games at Wii diskspeed
GC Audiostreaming Fix
Supports full-size DVD and DVD9 discs for GC homebrew
Supports GC multigame discs
Supports Wii and GC multidisc games
True stealth mode
Does not modify RAM, making it virtually undetectable for the Wii
Full command set emulation
ARGON FEATURES (with WII D2C firwmare):
1- Work on all D2C WII boards, incl. G2C D1A!
2- 13 wires connection (3 optional wires for IMPORTS GAMES supported from firmware 1.3)
3- 100% UPDATABLE! Throught the on board JTAG connector* with Injectus or Infectus2 ( see below )
4- ACTEL3 FAMILY FPGA - A3P125 - Military quality and security
5- Direct Boot from Wii games
( extreme compatibility, more than Wiikey/D2Ckey/D2Pro / Wasabi)
6- Dirct boot for every GC game - Full supported from firmware 1.6
7- Multiple disc support
8- Silver games support - Supported from firmware 1.5
9- Audio streaming for GC Games supported
10- Partial regional Patch (work on 80% of games) - SUPPORTED FROM FIRMWARE 1.3
* necessary the INJECTUS PROGRAMMER or INFECTUS2
ARGON PACKAGE:
1- ARGON MODCHIP with JTAG CONNECTOR on BOARD -Below Left ( Injectus Programmer sold seperately )
2- FLAT CABLE ARGON
For updating it is necessary to buy separately :
1- INJECTUS PROGRAMMER JTAG ( Simple USB Attachment which plugs into Argon with Packaged Cable )
2- INFECTUS2 - Below Right - Mod Board which has USB Connector on Board ( Extra soldering required - on infectus2 to Solder pads on ARGON Underside)
(pls. note that with infectus2 the JTAG connection need to be done with 4 soldering points)
Note: Argon D2C Mod chip can also be updated while installed in Wii Console ( Power Wii Console "ON" )
Wii D2C2 - Wii Drive Board - Found in Korea- ( all parts of the world as well )
Yes the Latest Manufacturing change has come about to improve production costs of the latest Wii Consoles in the Form of a Modified Wii Drive board being hailed Wii D2C2 or Wii D2C 2.
As a result the standard D2C modchip firmware does not function on them - In answer Modchip developers for the Wii have released some new firmwares to work on the newer consoles.
|
![]() |
![]() |
|
|
|





























