Wii Modchips - Installation Service - Australia

• Direct boot of NTSC Wii imports on NTSC consoles (no patch needed)
• Direct boot of PAL Wii imports on NTSC consoles (no patch needed, partial compatibility)
• Direct boot of NTSC Wii imports on PAL consoles (no patch needed, partial compatibility
• Direct boot of wii backups
• Direct boot of GC backups
• Direct boot of homebrew in GC mode
• Supports all currently available console/drive versions
• Supports D2B chipsets
• Sophisticated (true) update mechanism via DVD (future proof, expect cool features to come)
• Direct boot of different NTSC region Wii games/backups on US and JAP consoles
• Partial support for NTSC region Wii games/backups on PAL consoles
• Boots different region GC games/backups (partially without swapping)
• Supports multi-disc games for BOTH Wii and Gamecube
• Supports DVD-R / true DVD+R and +RW support (no bitsetting required!)
• Improved readsettings for recordable media
• Built-in audio fix
• Supports fullsize 4GB discs for gamecube homebrew
• Stealth mode
• 512 byte EEPROM to store configuration
• Quicksolder interface - no wires required
• Unique disc backup application via sdcard
• Compact design, best quality components, rock solid high speed controller
• Professional ESD packing
• Recovery mode - Can recover from a bad flash

 

 

 

Xbox 360 Mod chips - Installation - Australia

 

The NME-360 enables your XBox360 to play backups of your highly valuable original games.

NME-360 is a universal solution for ALL currently available XBox360 Consoles on the market.

Forget crazy dual mods with 30+ wires or even bricking your DVD drive by flashing corrupt/wrong firmware files.

Your original firmware stays untouched and intact at any time when using the NME-360.
There is no need for any firmware reading or flashing.

 

• one chip for all drives: Xbox 360 Samsung  ms25 and ms28, Hitachi/LG 46,47,58,59, 78 FL/FK, 79 FL/FK, all BenQ drives!!!
  Added logic to support possible future Xbox 360 Hitachi/LG versions as well
  100% Auto detection of Backup or Original on Xbox 360 Samsung and Hitachi drives (BenQ requires manual switching)
  boots stealth and non-stealth backups - optional: Power Led will turn off when a Backup is detected
  optional: disables the network when playing backups
  optional: disables the rear USB connection when playing backups (for disabling USB Wlan)
  no DVD writer model issues. Works with all DVD writers
  now working with pioneer 111d and Pioneer based burners as well as all LG burners.
  100% Firmware Stealth, when MS tries to read the Firmware then it replies as 100%  original unmodified. No error code E66.
  optional: 100% Live secure when playing Xbox 360 Backups
  the result of 1000s of hours of research and programming
  based on Actel Logic for most possibly stability
  manufactured with highest quality Logic, PCB and components. Made in Europe.
  complies with RoHS directive (lead free). Gold plated solder pads, for easy soldering.

 

 

 

Xbox Mod-chips:

 

 

Enigmah Xbox Mod Chips

Enigmah Mod Chip for Xbox. Similar in specs to the Xtender mod-chip, it requires 29 wires, but also removes Macrovision. There are two optional wires to solder for Macrovision Off and further two wires for DVD Reset Function.

 

 

Xtender Xbox Mod Chips

Xtender Xbox mod chip works on ALL Xbox models from ALL regions and plays every Xbox game including originals, import originals and all backups.

 

 

Messiah X Xbox Mod-Chips - Xbox " Harry Mod "

Xbox Mod Chip

The Messiah X xbox chip has only 11 wires and DVD support. This chip made very famous aka - Harry Mod - enabled you to install the chip then while xbox power still on you could cut 2 wires to the chip and the Flash the onboard TSOP - the remove the modchip completely- The first Xbox softmod - was done using these chips only 5 months after release of the Xbox - most modders of Xbox think that softmodding Xbox came very late in the scene- not so with the Messia X - "Harry Mod"

 

 

OpenXbox PC BioXX Xbox Mod Chips

This was the huge piece of hardware and chip for Xbox that had direct cable link to PC for easy upgrade - only 9 Wires to install - Pain to install and other simpler mods proved much better overall.

 

 

Enigmah Xbox Mod Chips

Enigmah Mod Chip for Xbox. Similar in specs to the Xtender mod-chip, it requires 29 wires, but also removes Macrovision. There are two optional wires to solder for Macrovision Off and further two wires for DVD Reset Function.

 

 

Matrix Xbox Mod Chips - The First Solderless Modchip ever !!

Here we had a very innovative design for Xbox modchips and - console mod chips for any console A ( likely the FIRST - no solder modchip ) no-solder, no-wire mod chip for the Xbox - but required only 1 screw and a very fine flexible Pin arm to be positioned over the "DO" Point on the Xbox - sometimes people complained this very fine connection point would slip off causing Xbox not to function - also after a while the DO point would wear completely down until no connection could be made- then the modchip could be soldered in anyway and the reverse side of the main board the Alternate DO point could be utilized.

 

 

Chameleon Xbox Mod Chips

This is the chip that replaced the very famous Matrix Modchip for Xbox

 

 

Aladdin Xbox Mod Chips

The Aladdin Series modchips have about 24 variations - the most well known are - Xbox Aladdin , Xbox Aladdin 2, Xbox Aladdin XT, Xbox Aladdin 4032, Xbox Aladdin 4064, Xbox Super Aladdin Live, Xbox Aladdin 3, Xbox Aladdin Advance, Xbox Aladdin Plus, and all programmable by Evolution X Dashboard or using The Aladdin Family Programmer-

 

 

The DuoX2 and DuoX3 modchips for Xbox were awesome for their price and could be programmed with all the latest bios easily through Evox. These chips were easy to install with sometimes only 3 wires. Excellent decent Quality Budget Modchips for Xbox

 

 

DuoX 2 GS Mod chips for Xbox - Duo X2 GS Xbox

The Duo X2 GS came in 2 versions - White version flashed and shipped with Cromwell Linux Bios - which could be reflashed after installation by a Linux Bootable Bios CD - and The Blue DuoX 2 GS which is available and shipped with either M8 Evolution or M8 Evox Bios or Executor or X-cutor Bios

 

 

Apple Xbox Mod Chips

Another good quality Budget Xboix modchip

 

 

Cheap Mod Xbox Mod Chips - Xbox Cheapmod

A simple yet workable SST flashable on simple PCB BOard

 

 

PC Bios Chip Xbox Mod Chips

Early on people were just installing a Light erasable Bios Chip that was programmed with an Xbox Bios using a PC Main Board booted in DOS

 

 

 

XALX - XALX2 - XALX2+ - XALX 2+ Revision 2 - XALX 2+ Revision 3 - XALX 2 + Revision 4

The XALX range of Xbox modchips only installed at Blade Electronics - proved to be the highest Quality and the Best Xbox modchip ever released- - Gamers world wide are still enjoying the most easy to use feature rich modchip ever. Thanks to the high co-operation of the overseas developement Team

 

 

 

 

PS2 Mod chips - Installation - Australia

 

The Modbo v4.0 is the latest chip from the guys at Modbo.com. The Modbo v4.0 is compatible with v5 to v16 and it is also compatible with the newly released SCPH-7700x & 7900x consoles. Its PCB layout is a perfect “L” shape which makes install a breeze. We believe this chip is a great solution for those looking for a compact and feature packed chip without the high price tag. We also want to explain to customers that there are two producers of the Modbo range of chips, first are the guys at Modbo.com who produced the Modbo 3.0 & Modbo 4.0. Second are the guys over at Modbo2.com who produced the Modbo v2.1 & Modbo 745.

 

 

A major difference we found between Modbo 4 and Modbo 745 is the Modbo 4.0 does work from v5 to v16 as advertised, but the Modbo 745 has trouble working in consoles under v9. Another bonus with the Modbo 4.0 is its now running the Matrix Infinity firmware v1.91 and is also possible to upgrade the firmware at a later date without any problems. If that wasn’t enough, they have now managed to get the firmware’s config menu and all its options to work and save. You can now go into the config menu and setup the Modbo 4 the way you want it, this is extremely handy for a lot of reasons. The Modbo 4.0 also uses a clock point, some of our customers have found that chips using a clock point “CX” are generally more stable then the same type of chip not using a clock point.

 

 

The Modbo 4.0 is a clone of the original Matrix Infinity range of PS2 mod chips. One of the major improvements Modbo 4 has over other Matrix clones is its better compatibility with DVD 9 and runs dual layer much better then older models. Modbo 4.0 comes on a differently laid out pcb to earlier model Modbo chips, allowing for a slightly neater install. There are a few clones of the Matrix Infinity floating around, Modbo , AppleEx , Matrix Infinity SE and some more. The good thing about these chips is you are getting most of the functions of the original Matrix Infinity at the fraction of the cost. The Modbo 4 also has auto media detection for direct booting and All Region DVD Support. The Modbo 4 also comes with a Diode fix for the PSTwo Slimline v12.

 

 

Please note that the Aus PAL consoles *need* the "H" point connected. This point is normaly only used on NTSC consoles, but our Aus PAL consoles require this point to function. As the PAL diagrams do not show "H" point, use the USA diagrams for v9 to v16 & the JAP diagrams on v5 & v7 for only the "H" point.

 

Wii Chip - Installation Diagram

 

The InFeCtuS Argon Wii is based on an 350 MHz Actel A3P-125 FPGA, which is programmable through a JTAG connector - in conjunction with either an InFeCtuS 2 device or an Injectus programmer. It has features similar to the D2CKey, and as of firmware v1.3 supports region-free play.

The InFeCtuS team have said a soon to be released firmware will lower the wire count from 16 to 10 for the D2C chipset as a result of the new competition from the Wasabi modchip. It will also introduce support for all the current Wii chipsets rather than just the D2C chipset (wire count for non-D2C chipsets will be 6). Also the update will grant the ability to upgrade the modchips firmware via DVD - despite InFeCtuS recommending the JTAG connector as the preferred upgrade method.

 

BRISBANE - SYDNEY - PERTH - MELBOURNE - ADELAIDE - GOLD COAST - TOOWOOMBA - REDCLIFFE - DARWIN - NOTH COAST - QUEENSLAND